|
PERMATEX 81775
|
|
$8.13
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$8.13
Total
|
|
|
|
|
|
|
|
|
| Rust Treatment; 8 fl. oz. |
Provides one-step treatment that destroys old rust and prevents new rust. Just brush or spray on. Within minutes, rust is replaced by a durable black polymer coating that may be painted. Excellent protective primer. Specially formulated to be used with body filler and fiberglass. Can be used when temperature is between 50°F and 90°F (10°C and 32°C) and on surfaces which do not exceed 200°F (93°C).
Directions For Use:
- Use gloves to prevent staining of hands.
- Scrape or wipe off dirt & oil. Sand or wire brush rusted surface.
- Shake well before using. Pour a small amount into a separate disposable container. Do not return unused material to bottle, or dip the applicator into the original bottle, as contents may be prematurely activated.
- Brush or sponge on a thin layer using long thin strokes. Try to contain Rust Treatment to rusted area being treated as product will stain surrounding paint. Remove splatters with detergent and water immediately.
- A black coating will begin to appear in 15-30 minutes. Apply a second thin coat within 20 minutes, to produce a uniform color.
- Allow 24 hours protected from moisture before top coating. Acrylic latex finish paints require a solvent-based primer/sealer before painting. Lacquer/enamel-base paints may be used without a primer.
- Clean brushes and other tools immediately after use with detergent/water.
- For Automotive Applications (NOT RECOMMENDED FOR AUTOMOTIVE EXTERIOR SHEETMETAL REPAIRS): Allow an extra 24 hours drying time to allow trapped moisture to evaporate before top coating. For a smooth finish, use sandable primer and sand with 220 grit or finer sandpaper before top coating.
Attention California Customers - Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
|
|
