WAGNER
More Information for WAGNER BD126495
Continue Shopping
 
WAGNER BD126495close
Part image
Image is of a typical part(s); part appearance varies by application. Rotors & Drums are sold individually
WAGNER BD126495 Specifications
ConstructionFull Cast
Disc FinishDirectional
Height (IN)2.658
Height (MM)67.5
MaterialCast Iron
Nominal Thickness (IN)0.708
Nominal Thickness (MM)17.9
Outside Diameter (IN)12.597
Outside Diameter (MM)319.9
Rust Resistant CoatingNo
Solid Or Vented Type RotorVented
Surface TypeSmooth
Wagner Brake rotors are engineered, tested and certified to perform safely and effectively on today's vehicles.

Features & Benefits:

  • Vapor Corrosion Inhibitor (VCI) bag reduces rotor prep & saves installation time
  • Smooth surface finish provides less pad break-in time
  • Superior metallurgy and tighter tolerances resulting in optimal performance
  • Precision cut finish of outer diameter prevents improper balance issues
  • Field tested reliability

Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function


Videos

Product Highlight: Wagner E-Coat Rotors

Tech Tips: How to Install Brake Pads and Brake Rotors

OEM / Interchange Numbers: 26700FG000, 26700XA00A

Warranty Information:
12 Months / 12,000 Miles