| Brake Pads are sold as a set. Quantity of one (1) is for both wheels |
|
|
| Brake System: Ate; Thickness [mm]: 18; Number of Wear Indicators: 2; Length [mm]: 151; Height [mm]: 49; Performance Series |
Ferodo’s DS Performance brake pads provide the kind of braking power normally associated with racing cars - all without the need to build up and maintain high operating temperatures.
The Drivers Choice
Giving low and high speed braking efficiency, reduced stopping distances and consistent brake pedal feel from cold, DS Performance brake pads are the drivers choice for safe, high performance braking.
Technically Proven
Ferodo DS Performance brake pads give consistent braking where others may fade. When the going gets hot Ferodo DS Performance brake pads will stop you again, and again...always safely. Ferodo DS Performance brake pads also has excellent water recovery characteristics, which enable you to regain maximum efficiency quickly - not miles later. And with built in anti-corrosive properties, there is no danger of brake seizure.
Hot Stuff...
Ferodo DS Performance brake pads are manufactured with a thermal underlayer between the friction material and the backing plate to assist heat dissipation during high performance braking. This helps to prevent over heating the braking system, damaging calliper seals and brake fade.
...kind to your Discs
Many high performance brake materials are harsh and can cause faster than normal disc wear. Ferodo DS Performance brake pads are formulated to minimise disc wear without losing the friction life characteristics associated with Ferodo products.
...and ready to perform
Ferodo DS Performance brake pads are supplied to you 'ready to perform' which means that they reach maximum efficiency after only one or two brake applications.
 Installation Tips - Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
FERODO Warranty Information:12 months/12,000 miles |
|
