Image is of a typical part(s); part appearance varies by application. |
|
|
Diameter 1 [mm]: 200; New Part;Diameter 2 [mm]: 200; Number of Teeth: 28; Hub Profile: 20,3 x 22,1; With central slave cylinder |
One in three vehicles in Europe are fitted with Valeo clutches. Valeo clutches feature the latest technologies such as dual mass flywheels, flexible flywheels, and hydraulic clutches. Valeo key benefits: - High-quality parts originating from technologies developed in the OE market and available for the aftermarket.
- Unique packaging that holds the kit under a film and prevents the components from moving. This packaging ensures the protection of the parts during carriage.
Tips & Tools For The Job
- Wear a Dust Mask to protect against hazardous clutch dust. You can also spray the clutch with water prior to removal to reduce the amount of airborne dust during disassembly.
- Use a Flywheel Turner to hold the flywheel in place while removing and reinstalling the pressure plate bolts.
- Apply Blue Threadlocker to flywheel bolts prior to installation to prevent backing out due to the high vibrations flywheels are subject to.
- Use the provided lubricant to lightly lubricate the splines of the input shaft. Over lubricating the input shaft risks lubricant transfer to the clutch friction disc and can cause clutch slippage.
- Be sure to install the new clutch friction disc in the correct direction. The disc will have a "Flywheel Side" label on one side.
Additional Resources
Clutch Troubleshooting Guide
Clutch Disc Facing Contamination
|
OEM / Interchange Numbers: 3000951010 |
|