Brake Pads are sold as a set. Quantity of one (1) is for both wheels |
FERODO FDB4178 Specifications |
---|
Brake System | TRW | Height [mm] | 53.0 | Inspection Tag | R90 Homologated | Length [mm] | 87.1 | Number of pads | 4 | Supplementary Info | with spring | Supplementary Info | with brake caliper screws | Thickness [mm] | 17,0 | WVA Number | 20961 |
|
|
PREMIER; Thickness [mm]: 17; Inspection Tag: R90 Homologated; with spring; Brake System: TRW; with brake caliper screws; WVA Number: 20961; Number of pads: 4; Length [mm]: 87.1; Height [mm]: 53 |
Ferodo delivers superior quality with premium parts that meet or exceed the highest design and manufacturing standards. As an aftermarket customer, you can rely on the same level of quality as found on the OE parts for your vehicle. All Ferodo parts are tested to comply with the highest quality standards.
Installation Tips - Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
FERODO Warranty Information:12 months/12,000 miles |
|