LARES
More Information for LARES 1352
Continue Shopping
 
LARES 1352close
<
>
Part image
LARES 1352 Specifications
Inlet Port Thread DiameterM18-1.50
Input Shaft Diameter0.75 Inch
Input Shaft Diameter19mm
Mounting Hole Quantity4
Outlet Port Thread DiameterM16-1.50
Output Shaft Diameter1.25 Inch
Output Shaft Diameter32mm
Total Turns Lock To Lock3-1/2 To 4
Remanufactured; Reman; 4 Bolt Mount
Rebuild Process:
  • Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look.
  • Each component is carefully inspected and replaced if not to OE tolerances.
  • All seals and O-rings are replaced with OE equivalent parts.
  • Each unit is tested to ensure OE performance.
  • Painted with a high quality paint.
Installation Tips
  • Replace Power Steering Pressure and Return Hoses when replacing the steering gear. Steering hoses can degrade internally and cause contamination in the power steering system, which can damage the new rack & pinion
  • Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
  • Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
  • Bleed the system to prevent noise and extend the life of the steering components
Technical Support

Lares offers technical support for all of their products. Misdiagnosis is common on steering components and the technicians can help you determine if your part is the problem.

📞 Phone: 1-800-555-0638



Attention California Customers - Warning: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov


LARES Warranty Information:
Limited lifetime (commercial vehicles 12 months) All Lares gear boxes come pre-adjusted to OE specifications. Please do not make your own adjustments, as this will void the warranty.
Warranty Details