Cambiare's emphasis on quality and range development has resulted in a range sourced from across the globe. All parts are provided by OEM or BER compliant aftermarket suppliers, all with a long history of supplying parts into the European aftermarket.
All parts conform to the latest TS16949, ISO9001 and ISO4001 standards and are tested thoroughly to ensure that the product in the box is of the highest quality. In some instances parts will even be tested twice – post production and prior to being dispatched.Parts that go through this specific testing process will feature a quality sticker, showing that the part has undergone a rigorous testing process.
Mass Air Flow Sensor Fault Diagnosis
Check for Vacuum Leaks First!
Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:
Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
Cracked Intake Boot (found in the "Engine" category)
Check for Vacuum Leaks First!
Videos
Additional Resources
RockAuto Newsletter: