• Bushing design features excellent abrasion, wear resistance, extreme temperature tolerance, and resistance to oils and fluids
• Over-sized metal rod provides strength
• Full-ball stud provides smooth articulation and excellent durability
• Wrench-flats or hex design for easy service
• Corrosion-resistant coating
• Resistance to extreme temperatures, oils and abrasion
• Manufactured at TS 16949-certified facilities to help with consistent high-quality
• Premium, high-quality aftermarket component

How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

1. Use a digital caliper or micrometer for a precise reading
2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.

ACDelco breaks down their premium portfolio of Original Equipment and Aftermarket parts into two tiers: GM Original Equipment and ACDelco Gold.