|
|
|
Delphi brake discs are produced using CNC manufacturing processes, which are among
the most advanced in the industry. CNC manufacturing processes ensure adherence
to extremely tight tolerance and guarantee perfect parallelism. Delphi’s
brake disc specifications and the control of our manufacturing processes allow
us to meet OE specifications. What’s more, in anticipation of impending
European legislation regarding the replacement of discs, Delphi is already making
changes to be fully compliant with a possible ECE R90 legislation.
 Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
Warranty Information:12 Months / 12,000 Miles |
|
