More Information for TRANSMISSION AUTHORITY T281130

Continue Shopping

Point to Zoom

TRANSMISSION AUTHORITY T281130 Specifications
Transmission Manufacturer	General Motors
Neutral Safety Switch	With Bosses on Driver Side
Pan Bolts	17
Cooler Lines	9 Inch Apart - Central Lube System
Fluid Quantity (L)	13
Shift Type	1-3/4 Inch Manual Shift Shaft Size
Fluid Type	PZL-LVMULTI
Lockup	Yes
Output Type	Bolt on Yoke
Transmission Speeds	4-Speed
Transmission Family	4L80E
Fluid Included	For US shipments only
Bell Housing	No Bolt Hole at the 12 O'clock Position
Tail Housing	With

Reman

The Transmission Authority is the authority on quality, selection, and convenience. All of The Transmission Authority's remanufactured transmissions follow strict build specifications and undergo a variety of testing throughout the manufacturing process, including proprietary dynamometer testing for at least 30 minutes. When you need a remanufactured transmission that is powerful, efficient, reliable, and covered by the industry's best warranty, look no further.

Features:

Fully remanufactured valve body, with complete system correction and recalibration kit, improves pressure control and shift quality
Upgraded actuator feed limit valve prevents missing shifts and premature transmission failure
Upgraded 34 element intermediate sprag increases holding capacity
All-new shift solenoids ensure positive shifting
EPC solenoid is tested separate from the transmission to confirm precise pressure control
Updated force motor for improved pressure control
Updated pressure regulator prevents overly high pressure
Case connector is updated to the latest design on pre-1994 versions, and a vehicle harness pigtail is provided to address connection issues with the early design
Fully remanufactured torque converter is tested for leaks, lock-up, concentricity, and balance. Upgrades exceed OE requirements and eliminate the possibilities of front seal leaks, premature bushing wear, and vibration
No Walkout rear case bushing is installed, addressing an OE flaw, to prevent case and output shaft damage
All-new custom-spec bushings to improve internal fluid flow control and pressures
Every transmission is cold-and hot-tested using a proprietary dynamometer testing program that includes fully synthetic automatic transmission fluid and a filtration system

**How Do I Find My Transmission Tag ID?**

The Tag ID will be printed on a white sticker in one of the above highlighted locations on your transmission (Ex: 4LFD)

More Information about The Transmission Authority

Additional Resources

Installation Instructions

Attention California Customers - WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.

TRANSMISSION AUTHORITY Warranty Information:
3 years For Passenger Vehicles And Light Duty Trucks (Up To 1 Ton - Non Commercial Use). 18 Months/100,000 Miles For Commercial Vehicles And Heavy Duty Trucks. Warranty only valid for shipments made within The contiguous United States.
Warranty Details