| Brake Pads are sold as a set. Quantity of one (1) is for both wheels |
|
|
| x 2 Pads Piston Clip and Shim x 2 Pads w/Finger Clip |
Fahren pads and shoes are subject to rigorous tests and quality check throughout the product process to ensure high levels of performance. All parts are manufactured according to ECE Regulation 90 (R90) to maintain the highest build quality. R90 testing ensures that front and rear braking performance matches OE specifications.
The friction material used in Fahren brake pads is developed specifically for each application. Fahren pads are produced with an under-layer that dampens vibrations to prevent noise. It also prevents the transfer of heat from the pad to the brake fluid. This special material has a high bonding strength that sticks the friction material to the back plate. All Fahren pads and shoes are free from asbestos, lead and Cr6+.
 Installation Tips - Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
FAHREN Warranty Information:12 months/12,000 miles |
|
