|
DORMAN 2630302
|
|
$115.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$115.79
Total
|
|
|
|
|
|
| The float arm (where pictured) may ship detached to prevent damage in transit. To connect, simply snap the wire end into the sender hole. |
| DORMAN 2630302 Specifications |
|---|
| Connector Color | White | | Connector Gender | Female | | Connector Shape | Flat Plug | | Gasket or Seal Included | Yes | | Height (MM) | 243 | | Housing Length (MM) | 174 | | Housing Material | Plastic | | Housing Width (MM) | 94 | | Inlet Outside Diameter (MM) | 7.89 | | Inlet Type | Male | | Length (MM) | 19.5 | | Lock Ring Included | No | | Maximum Flow Rating (GP) | 25.63 | | Maximum Pressure (PS) | 116.03 | | Outlet Diameter | 9.49 MM | | Outlet Quantity | 1 | | Outlet Type | Male | | Package Contents | 1 Fuel Pump Module Assembly | | Terminal Gender | Male Female | | Terminal Quantity | 4 | | Terminal Type | Spade | | Top Mount Diameter (MM) | 6.35 | | Width (MM) | 6.35 | | Wire Gauge Measurement | 1.5 | | Wire Quantity | 4 |
|
|
This fuel pump module assembly matches the fit and function of the original parts in specific vehicles. Built from durable materials, this pump is designed to be reliable over a long service life. Features & Benefits:- Direct replacement - this fuel pump assembly matches the fit and function of the original equipment fuel pump on specified vehicles
- Durable construction - this fuel pump is made of quality materials for a long service life
- Saves money - offers original equipment quality at a competitive price
- Quality assured - this fuel pump assembly has undergone rigorous testing to ensure reliable performance
 Benefits of Purchasing a Fuel Pump & Housing Assembly Purchasing just the fuel pump is less expensive up-front, but a complete Fuel Pump & Housing Assembly provides added benefits:
- Extend Service Life: New strainer(s), hoses, sensors and other components help resolve problems that could be caused by more than just the pump.
- Reduce Install Time: Since you don't have to disassemble the housing, which could lead to damage, replacement becomes a simple swap, dramatically reducing installation time.
- Save Money: The cost of the assembly is often cheaper than buying the components individually, and means you only have to do the job once.
 Prevent Premature Fuel Pump Failure Preventing premature fuel pump failure is far less expensive and time consuming than continuing to replace the pump. There are three common causes for premature fuel pump failure:
| ELECTRICAL ISSUES |
Poor electrical connections will mimic symptoms of a failed pump, sometimes resulting in unnecessary replacement. Before replacing the pump:
- Use a Fuel System Tester to test pump pressure is within expected range
- Use an Electrical Tester to test for bad wiring, burnt or corroded connectors
- Check / Replace faulty Fuse(s) and Relay
BEFORE REPLACEMENT |
| FUEL CONTAMINATION |
Dirt, rust or debris in the fuel can clog strainers and stick to internal pump components. When replacing the pump:
- Replace Fuel Filter or Fuel Strainer
- Empty and clean the tank with Fuel Tank Cleaner
- Fill tank with fresh, uncontaminated fuel of appropriate grade
DURING REPLACEMENT |
| PUMP DAMAGE / OVERHEATING |
Running low on gas causes your fuel to heat up quicker, and your pump to work harder. After replacing the pump:
- Maintain at least 1/4 tank of fuel and use a Fuel Additive / Conditioner to keep pump cool and lubricated
- If vehicle is stored without use, drain tank to prevent pump corrosion from fuel oxidation
AFTER REPLACEMENT |
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
| OEM / Interchange Numbers: 25344816 |
|
