|
|
Transmission Oil Cooler Assembly; 5/16" I.D. Molded Hose x 5/16" I.D. Molded Hose x 43 1/4" |
- OE Style Fittings
- Single-Lock beading/dual crimping provides superior hose/coupling integrity
- Zinc-Coated Tubes protects against rust and corrosion
- SAE J1019 Hose - 302°F temperature rating
- Heat and abrasion guards where needed
Tips & Tools For The Repair - Replace all Transmission Cooler Lines at the same time to prevent system contamination
- Apply Penetrating Oil to corroded or stuck cooler line fittings to help break them loose
- Disconnect the cooler lines using a Flare Nut Wrench and drain the transmission fluid into a Drain Pan
- Consider installing an In-Line Transmission Filter on the return line to prevent system contamination and extend the life of the transmission
- Measure the amount of old transmission fluid drained to determine how much new Transmission Fluid to add
- Use a Funnel to prevent spills when refilling the transmission
|
EDELMANN Warranty Information:Elite Power Steering Pumps, Rack & Pinions, Steering Gears: 100 Years / 1,000,000 Miles; Elite Hoses: Limited Lifetime; Non-Elite Hoses and Fittings: 12 Months |
|