|
HAYDEN 1710
|
|
$19.09
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$19.09
Total
|
|
|
(Only 1 Remaining)
|
|
|
| HAYDEN 1710 Specifications |
|---|
| Bolt Quantity | 4 | | Bolt Thread | 5/16-18 Hole | | Clutch Maximum Diameter (IN) | 7.2 | | Clutch Type | B - Non-Thermal & Std Thermal | | Color | Raw Aluminum in Color | | Description | Fan Clutches | | Distance From Clutch To Mounting Flange (IN) | 1.75 | | Drawing Type | B | | Duty Rating | Non-Thermal | | Electronic Clutch? | Non Electronic | | Fan Bolt Circle (IN) | 3 | | Fan Bolt Circle (MM) | 76.2 | | Fan Mount Dia. (IN) | 2.37 | | Fan Mount Dia. (MM) | 60.2 | | Material | Aluminum | | Meets / Exceeds OEM? | Yes | | Mount Dia. (IN) | 2.33 | | Mount Dia. (MM) | 59 | | Mounting Hardware? | Not Included | | Mounting Hole Quantity | 4 | | Mounting Type | Flange | | New or Reman | New | | O.E. Replacement? | Yes | | Overall Dia. (MM) | 182.9 | | Overall Height (IN) | 3.31 | | Overall Height (MM) | 84.1 | | Performance Rated? | Yes | | Pilot Depth (IN) | 0.75 | | Pilot Dia. (IN) | .63 to .75 | | Rotation | STD & REV | | Style | STANDARD DUTY | | Type | Non-Thermal |
|
|
Non-Thermal Fan Clutches operate based on the shaft speed of the water pump. At low and idling speeds the clutch
allows the fan blade to turn at almost a 1:1 ratio. At high speeds the silicone fluid contained in the clutch
will lose its ability to transfer the energy from the shaft to the fan clutch body (and therefore the fan)
and the fan is then allowed to almost free-wheel, removing its load from the engine.
Features & Benefits
- Low cost alternative for some standard thermal clutches.
- Spins at about 30-60% of the water pump speed.
- Cannot replace a heavy-duty clutch.
- Identified by the smooth, steel faceplate, (without a thermal spring assembly), on the front.
 Additional Resources
Fan Clutch Operation & Troubleshooting Guide
Installation Instructions
|
| OEM / Interchange Numbers: 1480830, 19189655, 3816400, 3931004, 5329100, C6OZ8616A, C6OZ8616D, E7TZ8616A |
|
