SEALED POWER H645ACP Specifications |
---|
Compression Distance | 1.548 | Dome Volume CC | Negative 6.9 | Head Type | Flat, 4 reliefs; Use w/Lock Ring LR-63; DUROSHIELD~ skirt coated piston | Lock Ring | Included | Minimum Clearance | 0.0010 | Part Material | Hypereutectic | Pin Diameter (Inch) | 0.927 | Pin Offset (Inch) | 0.030 | Pin Offset (MM) | 0.762 | Pin Type | F | Pin Weight Gram | 149 | Ring 1 Qty | 2 | Ring 1 Width | 5/64 | Ring 2 Qty | 1 | Ring 2 Width | 3/16 |
|
|
Hypereutectic; Duroshield Skirt Coated Piston |
Digital Diamond Profiled Pistons
Precisely Machined Pin Bores
- Accommodate fixed or floating wrist pins
- Machined for circlips
- Unsurpassed dimensional accuracy - diameter, +/-2.5 microns; straightness, 2.5 microns; roundness, 2.0 microns
- Large, precision-machined lube slots ensure worry-free operation
Weight-Matched Precision
- Piston/pin assemblies weight-matched to 4 gram (+/- 2 gram) maximum variation within each complete set
Next-Gen Skirt Coating
- Proprietary DUROSHIELD skirt coating
- Significantly reduces friction across entire RPM range
- Increases wear resistance for extended component life
- Superior NVH reduction
Exclusive FM 425 Aluminum Alloy
- Same material used in today's Cadillac, Corvette and Camaro engines
- 16% silicon content
- Superior thermal characteristics allow tighter wall clearances
- Propriety heat-treat process ensures superior strength
Diamond Optimized Skirt Profile
- Thermally compensated profiles prevent wall contact, piston slap
- Skirt "barrel" profile promotes oil wedge between skirt and wall
- Custom ovality prevents scuffing/scoring on outside corners
Fully Machined Bowl & Valve Reliefs
- Ultra-consistent compression ratio across all cylinders
- Maintanins consistent compression ratio across all cylinders
Custom TAC Ring Groove Geometries
- Machined "up-tilt" offsets thermal arching distortion
- Maintains optimal ring face-to-bore alignment for increased power, reduced oil consumption
- Groove "wave" held to max. of 15 microns
- TAC-Thermal Arching Compensation
|
OEM / Interchange Numbers: 645P |
SEALED POWER Warranty Information:12 Months |
|