Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Omix-ADA is more than just a parts manufacturer, they're a community of enthusiasts dedicated to producing the finest in off-road solutions. Their products have been propelling four-wheel drive vehicles down highways, back roads and over the world's roughest terrain for about two decades. Omix's team of engineers have developed, tested and trail ridden many of their 16,000+ products until they were perfected for you.

Tips & Tools For The Job

• Wear a Dust Mask to protect against hazardous clutch dust. You can also spray the clutch with water prior to removal to reduce the amount of airborne dust during disassembly.
• Use a Flywheel Turner to hold the flywheel in place while removing and reinstalling the pressure plate bolts.
• Apply Blue Threadlocker to flywheel bolts prior to installation to prevent backing out due to the high vibrations flywheels are subject to.
• Use the provided lubricant to lightly lubricate the splines of the input shaft. Over lubricating the input shaft risks lubricant transfer to the clutch friction disc and can cause clutch slippage.
• Be sure to install the new clutch friction disc in the correct direction. The disc will have a "Flywheel Side" label on one side.