DANA 2020487 Specifications |
---|
Axle Model | DANA 35 | Gear Ratio | 4.11 | Ring Teeth Count | 37 | Carrier Breaks | 3.31 / 3.54 | Cover Bolt Quantity | 10 | Include Installation Kit | No | On Vehicle Location | Rear | Pinion Gear Tooth Quantity | 9 | Pinion Shaft Diameter | 1.406 | Pinion Spline Count | 26 | Ring Gear Bolt QTY | 8 | Ring Gear Bolt Thread In. | .375-24 | Ring Gear Diameter (In.) | 7.62 | Ring Gear Rotation | Standard | Axle Type | Semi Floating | New Or Remanufactured | New | Pinion Gear Included | Yes | Ring Gear Included | Yes |
|
|
Count on SVL ring and pinion gearing to deliver the ideal blend of coverage, performance, and value for your vehicle. SVL gearing is engineered for all makes and ratios, and the processes that go into manufacturing SVL gearing make all the difference.
Differential Identification Guide
To order the correct ring & pinion, it's crucial to know the differential type and gear ratio on your vehicle.- First, determine your Differential Type.
- Next, determine the gear ratio on your vehicle using one of the following methods:
- Count The Teeth: Divide the number of teeth on the ring gear (big gear) by the number of teeth on the pinion gear (small gear). If you have 37 teeth on your ring gear and 12 teeth on your pinion gear, you have a 3.08 Gear Ratio (37 ÷ 12 = 3.08).
- Verify Through A Dealer: Verify the ratio using your VIN number. This will only be accurate if the differential has not been previously modified.
|
DANA Warranty Information:12 Months |
|