ACDELCO
More Information for ACDELCO 512357
Continue Shopping
 
ACDELCO 512357  
$127.79
Price
$0.00
Core
$127.79
Total
ACDELCO 512357close
<
>
Part image
ACDELCO 512357 Specifications
Anti Lock Brake Sensor IncludedYes
Anti Lock Braking SystemYes
Anti Lock Braking System TypeSensor
Bolt Circle Diameter (IN)4.500
Bolt Circle Diameter (MM)115.000
Brake Pilot Diameter (IN)2.781
Brake Pilot Diameter (MM)70.600
Connector GenderFemale
Flange Bolt Hole Diameter (IN)0.472
Flange Bolt Hole Diameter (MM)12
Flange Bolts IncludedNo
Flange Diameter (IN)5.930
Flange Diameter (MM)150.500
Flange Offset (IN)2.551
Flange Offset (MM)64.800
Flange ShapeModified
Height (IN)6.5
Hub Pilot Diameter (IN)2.827
Hub Pilot Diameter (MM)67.800
Length (IN)8
Terminal GenderMale
Weight (lb)8.1
Wheel Pilot Diameter (IN)2.7618
Wheel Pilot Diameter (MM)70.100
Wheel Stud Size (IN)0.472
Wheel Stud Size (MM)12
Wheel Studs IncludedYes
Width (IN)7.3
Gold
ACDelco Gold (Professional) Wheel Bearing and Hub Assemblies are a high quality alternative to Original Equipment (OE) parts. These unitized wheel bearings contain dual ball or tapered roller bearing elements sealed with lifetime lubrication. ACDelco parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for your vehicle.

Features & Benefits:
  • Multi-lip design configuration and extreme temperature seal materials help keep contaminants out
  • High carbon clean steel makes for a smooth and quiet operation
  • Provides the performance you expect from ACDelco
Installation Tips
  • Use an Axle Nut Socket to remove the axle nut
  • After removing the brake caliper, suspend it using a Caliper Hanger to avoid damage to the brake hose
  • A Wheel Hub Removal Tool can help remove a stubborn wheel hub assembly from the knuckle
  • During installation, use a Torque Wrench to tighten the axle nut to the manufacturer's specification. Do not use an impact wrench as it is easy to over tighten the axle nut. The torque specification can be found in your owner's manual
Symptoms Of A Failing Wheel Bearing & Hub

Wheel hub units are low maintenance parts, but that doesn’t mean they last forever. Uneven road surfaces, heavy driving conditions (such as towing or racing), and under-inflated tires put extra strain on the hub bearing and can lead to premature failure. Common signs of a bad hub unit include:
  • A humming, rumbling or growling noise that increases with acceleration
  • A loud constant whining or grinding noise when the vehicle is in motion
  • Excessive play in the steering wheel
  • Steering wheel vibration that changes with the vehicle speed or as the vehicle turns
  • ABS system malfunction

How To Identify The Faulty Wheel Bearing & Hub

It is often difficult to pinpoint which hub unit has gone bad while driving because noise and vibration travels through the frame of the vehicle. Here are a two tests you can do to help identify which hub unit has gone bad:

Shake Test: Identifying Play or Looseness
  1. Lift your vehicle so the wheel is off the ground
  2. Place your hands on the sides of the tire and try to shake the wheel
  3. Now place your hands on the top and bottom of the tire and try to shake the wheel again
  4. If you feel movement in both directions, you have play in your bearing and it needs to be replaced
  5. Note: If you feel movement when shaking the wheel left to right, but not top to bottom, you could have a worn out tie rod end. Similarly, if you have movement top to bottom, but not left to right, you may have a worn out ball joint.
Spin Test: Identifying Noise or Grinding
  1. Lift your vehicle so the wheel is off the ground and can spin freely
  2. Spin the wheel, in either direction, and listen for a grinding or howling noise
  3. If you hear a loud grinding or howling noise, that increases with the speed of the wheel, you have a failed bearing that needs to be replaced
  4. Note: It is best to test both front or both rear bearings at the same time so you can compare the difference between the two sides. If you have a failed bearing, there will be a noticeable difference in the amount of noise you hear during this test
ACDelco Quality

ACDelco breaks down their premium portfolio of Original Equipment and Aftermarket parts into two tiers: GM Original Equipment and ACDelco Gold.

GM ORIGINAL EQUIPMENT
GM Original Equipment parts are the true OE parts installed during production or validated by GM—designed, engineered, and tested to rigorous standards and backed by General Motors.
ACDELCO GOLD (PROFESSIONAL)
ACDelco Gold parts are the high-quality alternative to OE parts, manufactured to meet GM expectations for fit, form, and function and backed by General Motors.


OEM / Interchange Numbers: 19313406

Warranty Information:
24 Month / Unlimited Mile Warranty
Warranty Details