ACDELCO 46G0645A Specifications |
---|
Color | Black | Grease Fitting Included | No | Height (IN) | 1.98 | Height (MM) | 50.29 | Inside Diameter (IN) | 1.06 | Inside Diameter (MM) | 26.9 | Material | Thermoplastic | Mounting Hardware Included | No | Outside Diameter (IN) | 2.35 | Outside Diameter (MM) | 59.7 | Width (IN) | 1.35 | Width (MM) | 34.29 |
|
|
Features:- Fatigue resistance supports extended service life, even in harsh conditions
- Polyurethane bushing design features excellent abrasion, wear resistance, extreme temperature tolerance, and resistance to oils and fluids
- Manufactured at ISO 9001-certified facilities to ensure consistent high-quality
- Provides the performance and dependability you expect from ACDelco
- Economical value with dependable quality
- For General Motors vehicles as well as most makes and models
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
How To Determine Stabilizer (Sway) Bar Diameter To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.
- Use a digital caliper or micrometer for a precise reading
- Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
- Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.
|
OEM / Interchange Numbers: 19297371 |
|