More Information for STANDARD MOTOR PRODUCTS MAS0145
Continue Shopping
STANDARD MOTOR PRODUCTS MAS0145
Point to Zoom
STANDARD MOTOR PRODUCTS MAS0145 Specifications
Connector Gender
Female
Connector Quantity
1
Connector Shape
Oval
Notes
Sensor Only
Terminal Gender
Male
Terminal Quantity
6
Terminal Type
Pin
Features:
100% new, never remanufactured, so there's no leftover debris that can cause sensor failure.
100% computer-tested to ensure the ECU receives accurate airflow readings under hard engine conditions, which are required to balance and deliver the correct air/fuel ratio to the engine in order to achieve clean burns.
Proprietary sensing elements provide accurate airflow output to ECU over wide range of ambient temperatures.
Manufactured to strict quality standards to ensure each part outperforms other air flow sensors in aftermarket.
Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
Cracked Intake Boot (found in the "Engine" category)