ACDELCO
More Information for ACDELCO 36366018
Continue Shopping
 
ACDELCO 36366018close
Part image
ACDELCO 36366018 Specifications
End 1 Fitting Thread Diameter (IN)0.55
End 1 Fitting Thread Diameter (mm)14
End 1 GenderMale
End 1 TypeMale Inverted Flare
End 2 Fitting Thread Diameter (IN)0.55
End 2 Fitting Thread Diameter (mm)14
End 2 GenderMale
End 2 TypeMale O-Ring
Hose MaterialRubber
Hose ShapeMolded Assembly
Length (IN)48.5
Length (MM)1231.9
Mounting Brackets IncludedNo
ACDelco Power Steering Hoses are specially designed to perform in high-temperature areas and resist leaks.

Features:
  • Silver heat guard helps protect hose in high-temperature areas
  • Fluid restrictors help absorb vibration and reduce noise
  • Double-lock beading tube end provides crimping and assists in leak prevention for hose/coupling integrity
  • Switch sockets allow reinstallation of original equipment pressure sensors
  • End-lock tabs position hose for accurate alignment and routing
  • Movable mounting brackets allow easy and secure installation
  • Original style fitting means that no adapters are required
  • Split conduit (convoluted) hose protects vital areas
  • Zinc-aluminum alloy with an aluminum-rich epoxy top coating on tubes helps protect against rust and corrosion
  • Hose cover is highly resistant to oil, heat, and ozone - conditions which cause ordinary hoses to fail prematurely
  • High tensile strength braided fabric help the lines withstand pulsation pressures up to 1,500 psi and bursting pressure up to 8,900 psi
  • Unique crimping methods ensure uniform connections between hose and end fittings
  • Built-in shock absorbing characteristics in hose help ensure proper resistance to fluid surges
  • Hose assembly is engineered with a muffler to act as a pump noise suppressor, helping assure quiet operation
Installation Tips
  • Replace all power steering hoses at the same time, to prevent system contamination
  • Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
  • Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
  • Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components

Attention California Customers - Warning: This product can expose you to Lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov

OEM / Interchange Numbers: 19311574

Warranty Information:
Limited Lifetime
Warranty Details