STOPTECH
More Information for STOPTECH 97833006R
Continue Shopping
 
Drilled and Slotted Sport Kit
StopTech and Centric Parts Axle Packs are pre-matched, direct-fit brake pad and rotor pairings designed to simplify brake service and brake system upgrades for virtually any car or truck on the road. They are the easiest way for drivers to replace their existing rotors and pads with high quality, premium feature, high performance components from the championship-winning team at StopTech and Centric Parts.

Contents: Drilled and/or slotted high performance StopTech Sport Rotors for better cooling, shorter stops and reduced fade; StopTech Sport Pads for aggressive street or track day use; and StopTech High Performance Stainless Steel Brake Lines for reduced system compliance and increased durability

Application: Sports cars and sport sedans that are routinely driven hard on the street, autocrossed or tracked

Installation Tips
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

STOPTECH Warranty Information:
90 days/3,000 miles