DAYCO
More Information for DAYCO C72427
{Alternate Inventory Numbers: C72427:8}
Continue Shopping
 
DAYCO C72427  
$6.16
Price
 $0.00
Core
 + Sold in packs of 1x1
Pack
 $6.16
Total
Add to Cart
[Wholesaler Closeout - Private Label Pkg. - 30 Day Warranty] (Only 1 Remaining)
DAYCO C72427close
Part image
DAYCO C72427 Specifications
ColorBlack
Color IIBlack
Color IIIBlack
Color IVBlack
Color VBlack
Contains Heat ShieldRadiator Hose - Upper
Contains Heat Shield II3J
Contains Heat Shield IIIN
Contains Protective Sleeve13
Contains Protective Sleeve IIJBR
Contains Protective Sleeve IIIN
End 1 Inside DiameterN
End 1 Inside Diameter IIRADIATOR HOSE
End 1 Inside Diameter III1 1/2
End 1 Outside Diameter1.890
End 2 Inside DiameterN
End 2 Inside Diameter IIEA
End 2 Inside Diameter IIIThe inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
End 2 Inside Diameter IV1 1/2
End 2 Outside Diameter7.313
End 3 Inside DiameterN
End 3 Inside Diameter II.6000
End 3 Inside Diameter IIIMeets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
End 3 Outside DiameterA
End 4 Inside DiameterN
End 4 Inside Diameter IIY
End 4 Outside Diameter50036687770122
End 5 Inside DiameterN
End 5 Inside Diameter IIB0
End 5 Outside Diameter10
Hose TypeSingle I.D. Hose
MaterialCDA
Material IIAPJ52
Material IIIEPDM
SAE SpecificationSAE J20R4 Class D-1, SAE J1684 Type EC
Trunk HeightY
Trunk Height II36687770127
Trunk Height III11 1/4
Curved

Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose is built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C) that are required for OEM hose replacements.

Features & Benefits:
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
  • Meets SAE J20R4 EC, Class D-1 requirements
Service Tip: Squeeze along the hose and feel for inconsistencies; replace any hose that is soft, spongy or crunchy.
Signs it is Time to Replace Your Radiator Hose(s)

Prevent system contamination and coolant leaks that could cause your engine to overheat by checking for these common signs of Radiator Hose damage / failure:

INTERNAL DAMAGE

Soft / mushy hose ends, usually about 2 inches from the clamp.

Internally Damaged Hose
Internally Damaged Hose
LEAKAGE

Moisture, drips or coolant bleed marks on or around the hose clamps, connectors or hose.

Leak Damaged Hose
Leaking Hose
HEAT DAMAGE

Slight swelling, or a hardened, glossy cover that is covered with cracks.

Heat Damaged Hose
Heat Damaged Hose
OZONE DAMAGE

Tiny, parallel cracks in the cover, usually at hose bends.

Ozone Damaged Hose
Ozone Damaged Hose
ABRASION DAMAGE

Rubbing marks on, or damage to the hose cover.

Abrasion Damaged Hose
Abrasion Damaged Hose
OIL CONTAMINATION

Soft or spongy to the touch - bulges and swelling are readily apparent.

Oil Damaged Hose
Oil Contaminated Hose
Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.

Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

Regular Inventory Warranty Information:
12 Months/12,000 Miles