AUTO EXTRA 2360 Specifications |
---|
Height | 1.85 Inch / 47 Mm Without Stud | Mount Holes | 4.0 Inch / 101.6 Mm Elongated | Note | Stud And Bolt Holes Inline | Stud | M10-1.5, 28 mm |
|
|
Tips & Tools For The Repair - Inspect Motor Mounts (found in the "Engine" category) for signs of wear. Transmission and Motor Mounts typically wear at the same rate
- The original mount bolts can be difficult to remove. Apply Penetrating Oil and have a Breaker Bar handy to help break them loose
- Find a solid part of the transmission to place the Jack under. Do not use the fluid pan, it is not strong enough to support the weight of the transmission
- Apply Blue Threadlocker to mount bolts prior to installation to prevent backing out due to the high vibrations transmission mounts are subject to
|
AUTO EXTRA Warranty Information:30 days |
|