ANCHOR 2817
|
|
$6.26
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$6.26
Total
|
|
|
|
ANCHOR 2817 Specifications |
---|
Height | 1.86 in. / 47.24 mm | Material | Rubber, Steel | Stud | M10X1.5 1.15 in. / 29.21 mm |
|
|
Anchor Industries has earned a reputation as the automotive aftermarket’s leading supplier of engine and transmission mounts through its commitment to high-quality manufacturing.
Features & Benefits:- Both natural & SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life & performance
- All Rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements
- Any included fasteners are made of hardened steel with heat treated Grade # 5 bolts
- A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond
![](/Images/MoreInfo/install.png) Tips & Tools For The Repair - Inspect Motor Mounts (found in the "Engine" category) for signs of wear. Transmission and Motor Mounts typically wear at the same rate
- The original mount bolts can be difficult to remove. Apply Penetrating Oil and have a Breaker Bar handy to help break them loose
- Apply Blue Threadlocker to mount bolts prior to installation to prevent backing out due to the high vibrations transmission mounts are subject to
![](/Images/MoreInfo/doc.png) Additional Resources What Happens When Mounts Fail
Failure Signs and Diagnosis
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
ANCHOR Warranty Information:12 Months |
|