|
VICTOR REINZ 141004601
|
|
$48.79
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$48.79
Total
|
|
|
|
|
|
| Especificaciones de VICTOR REINZ 141004601 |
|---|
| Cabeza Bulón Tamaño (Milímetro) | 15 | | Longitud (Milímetro) | 208 | | Material | Acero | | Rosca Diámetro (Milímetro) | 11 |
|
|
Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.
Features & Benefits:- Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.
- When a specific tightening torque has been reached, the bolts are turned further through a defined angle, which pre-loads them into the plastic region. Consequently, no retorquing is necessary.
- Although it is a very effective means to get the maximum, uniform clamping load from each bolt, it permanently distorts the bolts, preventing them from being reusable under any circumstance.
Atención Clientes de California - Advertencia: cáncer www.P65Warnings.ca.gov
|
| Fabricante Original de Equipo / Números de Intercambio: HB33020 |
VICTOR REINZ Información de Garantía:12 Meses/12,000 Millas |
|
