FVP
More Information for FVP 12166036
{Alternate Inventory Numbers: 121-66036}
Continue Shopping
 
FVP 12166036  
$27.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$27.79
Total
FVP 12166036close
<
>
Part image
FVP 12166036 Specifications
ABS Sensor Ring IncludedNo
Bearings IncludedNo
Center Hole Diameter (IN)2.783
Center Hole Diameter (MM)70.700
Disc MountingFloating / DIH
Discard Thickness (IN)0.728
Discard Thickness (MM)18.500
Max PB Drum Dia in7.539
Max PB Drum Dia mm191.500
Mounting Bolt Hole Circle Diameter (IN)4.748
Mounting Bolt Hole Circle Diameter (MM)120.600
Nominal Drum Diameter (IN)7.484
Nominal Drum Diameter (MM)190.100
Nominal Thickness (IN)0.787
Nominal Thickness (MM)20.000
Outside Diameter (IN)11.614
Outside Diameter (MM)295.000
Overall Height (IN)3.740
Overall Height (MM)95.000
Solid Or Vented Type RotorVented
Stud/Lug Hole Diameter (IN)0.520
Stud/Lug Hole Diameter (MM)13.200
Stud/Lug Hole Quantity5
Surface TypeSmooth
Vane StyleStraight
FVP Rotors are designed to meet OE performance criteria.

Features:
  • Symmetric vane, split-core castings for uniform heat distribution
  • Double disc ground friction surface for optimal performance and service life
  • Non-directional finish

Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function



Attention California Customers - https://www.p65warnings.ca.gov/


Attention California Customers - WARNING: Cancer and Reproductive Harm


Warranty Information:
Limited Lifetime