PURE ENERGY
Plus d'informations pour PURE ENERGY T2270N
{Numéros d'inventaire alternatifs : MPAT2270N}
Continuer les achats
 
PURE ENERGY T2270N  
$518.79
Prix
$0.00
Dépôt de reprise
+ Vendu en paquet de 1x1
Conditionnement
$518.79
Total
PURE ENERGY T2270Nclose
<
>
Part image
Spécifications de PURE ENERGY T2270N
Joint d'étanchéité et kit de montage inclusOui
Inclus avec l'AchatTurbo, instructions, dépannage en ligne, seringue à huile pré-remplie, joints d'étanchéité, assistance routière
Solénoïde de commande des aubes / servo distributeur inclusNon - Pas Nécessaire pour le Modèle
Poussée Solénoïde inclusNon - Pas Nécessaire pour le Modèle
Soupape de recirculation incluseNon - Pas Nécessaire pour le Modèle
Matériau du boîtier du compresseur du turbocompresseuralliage d'aluminium
Refroidissement méthodeHuile Moteur et ou Liquide de Refroidissement
l'actionneur de la soupape de décharge inclusOui
Aube Régulateur inclusNon - Pas Nécessaire pour le Modèle
Capteur inclusNon - Pas Nécessaire pour le Modèle
Type de roulementPortée d'arbre
Turbine Matériau du boîtierFonte / Fonte Alliage
Comprend joints, Actionneur
Engineered and built for performance, efficiency and power, Pure Energy new and remanufactured Turbochargers are assembled to the highest quality standards. Strict test and evaluation processes assure peak performance and power are achieved while meeting the highest standards for reliability and quality. Units are fully disassembled into the subcomponents, cleaned with proprietary processes, vigorously inspected with digital technology and adhere to strict standards and specifications.

Features & Benefits:
  • 100% Dual Plane Balanced Turbine Shaft and Compressor Wheel - Eliminates high speed vibrations, harmonics and premature bearing failure
  • 100% New OEM Design or Upgraded CHRA Components - Assures performance and improves reliability and durability
  • 100% Electronic and Pneumatic Wastegate Actuator Function - Tested, calibrated and adjusted for proper pressure relief and boost functions
  • 100% Mechanical Fastener and Tolerance Verification - All critical points measured, gauged, torqued and witness marked
  • 100% Production Assembly Line Testing - Multi-computer and mechanical test operations monitor the turbo performance
  • Each Turbocharger includes a prefilled priming syringe for lubrication to help streamline post-installation startup procedures
Need Help?

Installation instructions and application-specific technical and troubleshooting information are available on the Pure Energy website here. In addition, live tech support from ASE master technicians can be accessed digitally here, or by calling 1-800-228-9672.

Have You Fixed the Issue That Caused Your Turbocharger to Fail?

Turbochargers are designed to last for the service life of the engine. When a turbocharger fails, it is important to look past obvious damage to locate and fix the root cause of the failure. In most cases, the cause of turbocharger failure originates from an installation error, improper vehicle systems, or improper operation of the vehicle, details about which are listed below.

LACK OF LUBE / CONTAMINATED OIL
Often caused by issues related to:
  • Low engine oil pressure/level
  • Obstructed oil supply/drain line
  • Improper weight of oil
  • Fast starts in cold weather
  • Hot shutdown (engine shut off at high rpm)
  • Engine blow-by
FOREIGN BODY IN EXHAUST / AIR INLET
Often caused by foreign particles entering the turbine or compressor stages during or after installation, such as:
  • Screws or nuts
  • Sand or dirt
  • Metal powder or shavings
  • Pieces of broken air filters
  • Compressor wheel lock nut
HIGH EXHAUST TEMPERATURE
Often caused by issues related to:
  • Incorrect fuel ratio (high fuel setting)
  • Insufficient air supply (caused by a plugged air cleaner, etc.)
  • A leak in the in the intake manifold or piping
  • Excessive exhaust restrictions
  • Plugged aftercooler core
DEFECTIVE WORKMANSHIP / MATERIAL
While rare, the visible evidence is often easy to recognize. Causes include:
  • Compressor wheel lock nut failure (nut is missing & there is damage to the vanes)
  • One-sided wear on the compressor housing
  • Back plate bolt is loosened and contacted the back of compressor wheel


Pure Energy Roadside Assistance Program

Two years of complimentary roadside assistance (a $240 Value) and special members-only perks are a click away – register each purchase to receive full benefits.


Attention aux clients en Californie - ATTENTION : Ce produit peut vous exposer aux produits chimiques y compris les métaux lourds y compris le chrome, qui est connu par l'État de Californie de causer le cancer et les troubles de la reproduction. Pour plus d'informations visitez www.P65Warnings.ca.gov

Numéros de constructeur de l'équipement d'origine / numéros d'échange : L3YB1370Z

PURE ENERGY Informations sur la garantie:
12 mois