DELPHI TA2304
|
|
$31.99
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$31.99
Total
|
|
|
|
DELPHI TA2304 Specifications |
---|
Adjustable | No | Bearing Material | Plastic | Color | Gray | Cone Outside Diameter (MM) | 17.85 | Dust Boot | Yes | Dust Boot Material | Choloroprene Rubber (CR) | End 1 Gender | Male | End 1 Thread Diameter (IN) | 0.551 | End 1 Thread Diameter (MM) | 14.0 | End 1 Thread Direction | Clockwise (Right) | End 2 Gender | Male | End 2 Thread Diameter (IN) | 1.0 | End 2 Thread Diameter (MM) | 25.4 | End 2 Thread Direction | Clockwise (Right) | End 2 Threads Per Inch | 16 | Finish | Coated | Height (MM) | 91.2 | Housing Material | Steel | Length Stud Center to End (IN) | 8.071 | Length Stud Center to End (mm) | 205.0 | Mounting Hardware Included | Yes | Position(s) | Left Inner, At Pitman Arm. For the position specific to your vehicle, refer to the Application tab. | Pre Greased | Yes | Stud Type | Threaded | Tie Rod Material | Steel | Tube Diameter (in) | 1.102 | Tube Diameter (mm) | 28.0 | Type | Straight | Weight (lb) | 2.5 | Width (MM) | 45.0 |
|
|
Features:- Extensive dimensional and material analysis to ensure the very best compatibility to the Original Equipment (OE) part
- Tested alongside the OE part for 250,000 cycles to check braking force, cornering force and suspension travel movement, to ensure the part performs like the OE
- Able to withstand temperatures below -40ºC and over 120ºC, helping to ensure they perform even under the harshest conditions
- Parts exposed to 720 hours of salt spray for optimum protection against corrosion
- Additional cataphoretic coating for greater protection against corrosion and enhanced aesthetics
Attention California Customers - WARNING: This product can expose you to chemicals including Carbon Black, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
|
OEM / Interchange Numbers: 3C3Z3304BA, 8C3Z3304G, AC3Z3304N, F81A3B406BA, F81Z3304BA |
Warranty Information:Limited Lifetime |
|