Features & Benefits

• First Time Fit® assures bolt-in replacement; no brackets or adapters required
• Unique fin design minimizes airflow blockage
• Reduces required compressor power, resulting in improved fuel economy and restores A/C performance to as-new condition
• Zinc diffusion layer improves corrosion resistance

El aluminio no se oxida, pero puede corroerse, especialmente cuando se expone a la sal de la carretera y a otros elementos en la parte delantera del vehículo. La corrosión es un aislante, que reduce la capacidad de intercambio de calor del condensador y provoca un desgaste adicional en el compresor del aire acondicionado y otros componentes. La corrosión puede provocar un pinchazo, que vierta refrigerante nocivo para el medio ambiente en el aire y requiera una costosa reparación y recarga. Un condensador con Protección Contra la Corrosión Adicional prolonga la vida útil de todo el sistema de aire acondicionado.

Consejos De Instalación

• Old Refrigerant must be removed from the system in accordance with local, state, and federal laws.
• Replace the A/C System O-Rings / Seals connected to the A/C Condenser to prevent a Refrigerant leak.
• If the new A/C Condenser does not have an integrated drier, replace the A/C Receiver Drier / Accumulator as well. After opening your A/C System, this part becomes saturated with moisture and needs to be replaced.
• After installing the new A/C Condenser, evacuate the system for at least 45 minutes to remove any moisture. Make sure it holds vacuum for at least 5 minutes. If it does not, you may have a leak in the system. Find the leaking component and repair or replace it.
• Recharge the system with the correct amount and type of Refrigerant as specified in your Owner's Manual.