|
|
|
Ford Parts are the original equipment for Ford vehicles and help restore vehicle performance and reliability. All Ford Parts are backed by Ford Motor Company and built with the engineering expertise that can only come from a manufacturer with over 100 years of experience.
 Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
FORD Warranty Information:New & Remanufactured Transmission & Gas Engine Assemblies: 3 years/unlimited miles (VALID IN THE UNITED STATES ONLY); Diesel Engines For Light Trucks: 2 years/unlimited miles (VALID IN THE UNITED STATES ONLY); Sheet Metal: Limited Lifetime Against Rust Perforation; Struts/Shock Absorbers on Non-Commercial Cars/Light Trucks: Limited Lifetime; Spark Plug Wire Sets: Limited Lifetime; All Other Parts: 24 Months |
|
