CENTRIC
More Information for CENTRIC 30609890
{Alternate Inventory Numbers: 306.09890}
Continue Shopping
 
CENTRIC 30609890  
$37.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$37.79
Total
[Wholesaler Closeout -- 30 Day Warranty] (Only 1 Remaining)
CENTRIC 30609890close
<
>
Part image
Brake Pads are sold as a set. Quantity of one (1) is for both wheels
CENTRIC 30609890 Specifications
Friction Material Bonding TypeIntegrally Molded
Friction Material CompositionSemi-Metallic
Inner Pad Height (IN)2.744
Inner Pad Height (MM)69.700
Inner Pad Width (IN)8.591
Inner Pad Width (MM)218.200
Mounting Hardware IncludedYes
Notes4 Pads with 1 Wear Sensor / Clip
Outer Pad Height (IN)2.744
Outer Pad Height (MM)69.700
Outer Pad Width (IN)8.591
Outer Pad Width (MM)218.200
Pad Quantity4
Pad Shims IncludedYes
Pad Wear Sensor IncludedYes
Prepared For Pad Wear SensorYes
Fleet Performance Pads; Posi Quiet XT; Includes Hardware
Centric Fleet Performance brake pads are specifically engineered to perform in pursuit, rescue, and emergency driving conditions. The Fleet Performance pad can safely stop vehicles from high speeds and will continue to work at very high temperatures.

Features & Benefits:
  • Para-aramid composites provides linear response, regardless of pad temperature
  • 100% positive molded for uniform friction material density
  • Specially engineered for pursuit, rescue and emergency, driving
  • Post cured for consistent performance throughout the, service life of the brake pad
  • Scorched to raise initial cold effectiveness and easy bed-in
  • Hardware included, where applicable
  • 100% Asbestos-free formulas

Installation Tips
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function


Installation Tips
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Attention California Customers - https://www.p65warnings.ca.gov/


Attention California Customers - WARNING: Cancer and Reproductive Harm


Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

CENTRIC Regular Inventory Warranty Information:
90 days/3,000 miles