MEVOTECH MS508191
|
|
$97.99
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$97.99
Total
|
|
|
|
Especificaciones de MEVOTECH MS508191 |
---|
Soporte Incluido | Sí | Bujes Incluido | Sí | Diámetro | 1.375 | Acabado | Resistente a corrosión | Incluye 'Hardware' | Sí | Longitud (pulg.) | 52.1 | Material | Acero | Ancho | 19.15 |
|
|
Características y Beneficios:
- Protegido de Corrosión: Evite la acumulación de óxido y aumente la longevidad con un tratamiento de superficie protector.
- Incluye 'Hardware': Simplifique la instalación con todos los accesorios de montaje esenciales incluidos
- Ingeniería Precisa: Las piezas se han innovado por dentro y por fuera para lograr una gran durabilidad y una fácil instalación.
- Materiales Premium: Se utilizan materiales de primera calidad en todos los componentes para vida extendida de repuesto.
- Probado rigurosamente: Las exhaustivas pruebas de durabilidad internas y de terceros garantizan el máximo rendimiento y resistencia
Cómo Determinar el Diámetro de Barra Estabilizadora To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.
- Use a digital caliper or micrometer for a precise reading
- Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
- Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.
|
Fabricante Original de Equipo / Números de Intercambio: 14056842, 15005612, 15571395, 88891781 |
|