Constructed to provide superior performance on the toughest heavy-duty A, B
and C section industrial drives. Gates Tri-Power belts carry a higher horsepower
rating than conventional cross section belts. They are ideal for drives with
small diameter sheaves where conventional A, B and C section belts are not recommended.
Vextra® construction that eliminates the stretch or elongation problems
associated with most V-belts, and increases belt service life by 33%.
Special molded notch reduces bending stresses, especially on drives with
smaller diameter sheaves.
Tough tensile members for superior resistance to fatigue and shock loads.
Bandless cut edge for even wedging action and uniform fit.
Meets or exceeds Rubber Manufacturer’s Association standards for
static conductivity.
Additional Resources