Instructions:
- Fill the master cylinder. Keep the master cylinder topped-off during brake bleeding
- Attach the brake bleeder fitting adapter to the bleeder screw
- Place one end of the long hose into the outside portion of the lid connection. Connect the brake bleeder fitting adapter to the other end of the long hose
- Start with the caliper that is the farthest from the master cylinder. Have someone pump the brake pedal 3 times and hold it down. Meanwhile, have a second person open the bleeder valve on the caliper. As soon as fluid stops moving, close the bleeder valve and repeat
- Repeat until all calipers are bled and there are no air bubbles coming out of the caliper
Attention California Customers - WARNING: This product can expose you to chemicals including Chromium (Hexavalent compounds), Nickel and Cobalt, which are known to the State of California to cause cancer, and Chromium (Hexavalent compounds) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
|
