WAGNER
More Information for WAGNER FC134280
Continue Shopping
 
WAGNER FC134280  
$2.14
Price
 $0.00
Core
 + Sold in packs of 1x1
Pack
 $2.14
Total
Add to Cart
WAGNER FC134280close
Part image
Heavy Duty DOT 3 Formulation; 12oz.
Use WagnerŽ DOT 3 MOTOR VEHICLE BRAKE FLUID on all brake systems requiring DOT 3 fluid, including ABS.
Features & Benefits:
  • Heavy Duty DOT 3 formulation
  • High Dry Boiling Point 401 degrees Farenheit / 205 degrees Celsius
  • Minimum Wet Boiling Point 284 degrees Farenheit / 140 degrees Celsius
  • Meets or exceeds FMVSS 571.116, SAE J1703
  • Formulated with rust inhibitors
Brake Fluid Comparison Chart

Fluid Type Compatible With Quality Chemical Composition Minimum Dry Boiling Point Minimum Wet Boiling Point
DOT 3
 DOT 3 Brake Systems Good Glycol Ether 401°F 284°F
DOT 4
 DOT 3 & DOT 4 Brake Systems Better Glycol Ether, Borate Ester 446°F 311°F
DOT 5.1
 DOT 3, DOT 4 & DOT 5.1 Brake Systems Best Glycol Ether, Borate Ester 518°F 374°F
DOT 5
 DOT 5 Brake Systems ONLY Specialty Silicone 500°F 356°F
How do I know if my brake fluid needs to be changed?

Brake fluid absorbs moisture. Water in brake fluid can boil during repeated or extended braking, creating air bubbles which reduce braking effectiveness. Water also can corrode metal brake lines. Change your brake fluid when:
  • A Brake Fluid Tester shows excess moisture
  • Fluid is dirty or rust-colored (it should be clear or translucent)
  • Brake pedal feels mushy or requires a lot of pressure (possible air bubbles)
  • You've reached the miles or years your owner's manual recommends for fluid changes
Not returnable once opened.
Videos

The Different Types of Brake Fluid


Attention California Customers - WARNING:  This product can expose you to diethanolamine known to the State of California to  cause cancer, and ethylene glycol monomethyl ether, which is known  to the State of California to cause birth defects or other reproductive harm.  For information go to WWW.P65Warnings.ca.gov


Warranty Information:
No Warranty