|
AMS AUTOMOTIVE 07154
|
|
$189.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$189.79
Total
|
|
|
|
|
|
|
|
|
In order to provide superior performance and lasting durability, AMS Premium New Clutch Kits utilize Tier-1 content that is manufactured to exacting O.E.M. standards. - All components are engineered to function as a precisely matched system
- Pressure plate assemblies are functionally tested for lift-off, balance, clamp load, release load, and finger height
- Disc assemblies are functionally tested for lateral run-out, compressed thickness, torsion durability, and spring rate
- Release bearings meet exact OEM fit, form, and function specifications to ensure the ultimate in load carrying capability and operational characteristics
- Pilot bearings or 100% brass pilot bushings (depending on vehicle requirements and operating conditions)
- U.S. manufactured alignment tools and detailed application-specific technical bulletins simplify the installation process
 Tips & Tools For The Job - Wear a Dust Mask to protect against hazardous clutch dust. You can also spray the clutch with water prior to removal to reduce the amount of airborne dust during disassembly.
- Use a Flywheel Turner to hold the flywheel in place while removing and reinstalling the pressure plate bolts.
- Apply Blue Threadlocker to flywheel bolts prior to installation to prevent backing out due to the high vibrations flywheels are subject to.
- Use the provided lubricant to lightly lubricate the splines of the input shaft. Over lubricating the input shaft risks lubricant transfer to the clutch friction disc and can cause clutch slippage.
- Be sure to install the new clutch friction disc in the correct direction. The disc will have a "Flywheel Side" label on one side.
|
Warranty Information:24 Months / 24,000 Miles |
|
