|
FRAM C1688
|
|
$12.97
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$12.97
Total
|
|
|
|
|
|
| FRAM C1688 Specifications |
|---|
| Bottom Outside Diameter (IN) | 4.500 | | Filter Type | Cartridge | | Height (IN) | 9.063 | | Housing Color | NA | | Inner Diameter Bottom (IN) | 2.234 | | Mounting Type | Cartridge | | Outside Diameter Top (IN) | 4.500 | | Reusable | No | | Top Inside Diameter (IN) | 0.531 |
|
|
 Oil Change Toolbox
Installation Instructions - Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
- Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
- Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
- Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
- Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket.
- Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
It is illegal to dispose of used oil or oil filters in a sanitary landfill or public waterway. Many towns have free hazardous waste drop-off sites, which a quick internet search will help you find.
|
| OEM / Interchange Numbers: 25012417 |
FRAM Warranty Information:Filters - Vehicle Manufacturer's Recommended Service Intervals
Hard Parts - 12 MonthsWarranty Details |
|
