At high apply pressures or with a worn servo pin bore, the servo piston is side-loaded in the case, causing friction and binding of the piston. The supported pin design of this Sonnax kit eliminates friction caused by side-loading and ensures the servo piston will apply and release without binding.

"Mystery" band failures are a common result of aftermarket servo return springs and weak OE springs prone to collapse that do not reliably release the servo. The Sonnax spring in this kit is race-calibrated to ensure consistent servo function for longer band life and a cooler transmission. The spring's higher seat pressure helps ensure full servo release, but also features a lower spring rate to prevent excessive release force in the apply position.

• Unique cover and pin combination eliminates piston binding that causes unexplained band failure
• Race-calibrated spring counteracts pin bias effect up to 275 psi
• Dual PTFE seal rings for better seal and low friction
• OE apply area
• Low-profile design ensures adequate clearance
• 6061 Anodized billet aluminum cover

• Supported Servo Cover
• Supported Servo Pin
• Servo Piston
• Return Spring
• Retaining Clip
• Gasket
• Cover O-Ring
• Pin O-Rings (2) 1 extra
• Drain Plug (not shown)
• Bolts (3) (not shown)
• Pin Shims (2)
• Spring Shims (2)
• PTFE Piston Seal Rings (2)

Adicional Recursos