FVP
More Information for FVP 14166019
{Alternate Inventory Numbers: 141-66019}
Continue Shopping
 
FVP 14166019  
$20.79
Price
$20.00
Core
+ Sold in packs of 1x1
Pack
$40.79
Total
FVP 14166019close
<
>
Part image
FVP 14166019 Specifications
Abutment Clips IncludedYes
Air Gap100.5mm
Bleeder Install Thread Count in3.5
Bleeder Screw IncludedYes
Bleeder Screw Thread Diameter10.000 MM
Bleeder Screw Thread SizeM10-1.50
Bracket IncludedNo
Caliper Casting MaterialCast Iron
Caliper ColorGray
Caliper ManufacturerDelco Moraine
Caliper TypeFloating
Casting Number633; 633R; 743; 743R
Inlet Fitting TypeBanjo
Inlet Thread Diameter10.000 MM
Inlet Thread SizeM10-1.50
Mounting Bracket IncludedNo
Mounting Hardware IncludedNo
Pad Wear Sensor IncludedNo
Pads IncludedNo
Piston Diameter80.000 MM
Piston Diameter3.150 in
Piston MaterialSteel
Piston Quantity1
Published Bore Size80
Rust Preventative CoatingYes
Reman;
FVP Friction Ready calipers are remanufactured to meet ensure predictable and reliable performance while providing long service life.

Features:
  • 100% pressure tested and inspected to guarantee proper operation and fitment
  • All guide bolts, pins and seals are replaced, guaranteeing the caliper will function correctly
  • Hardware and brackets included (where applicable) to facilitate an easy installation
  • Brake pads not included
Installation Tips
  • Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
  • Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
  • Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
  • Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
  • After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
  • After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid

Warranty Information:
Limited Lifetime