|
MEVOTECH MK8657
|
|
$10.90
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$10.90
Total
|
|
|
|
|
|
| Especificaciones de MEVOTECH MK8657 |
|---|
| Color | Negro | | Tipo de Diseño | al Extremo Enlace | | Altura (pulg.) | 3.0 | | Incluye 'Hardware' | Sí | | Longitud | 0.62 | | Material | Goma Natural | | Número de Bujes | 12 | | Ancho (pulg.) | 4.85 |
|
|
| Supreme; Juego de Buje; Incluye Bujes; No Incluye Pernos |
Características y Beneficios:
- Construcción de goma natural de alta calidad para una mayor durabilidad
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
 Cómo Determinar el Diámetro de Barra Estabilizadora To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.
- Use a digital caliper or micrometer for a precise reading
- Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
- Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.
|
| Fabricante Original de Equipo / Números de Intercambio: D8TZ5A486A, E6TZ5K483A, E6TZ5K483B, E7TZ5K483A, K8657 |
|
