CENTRIC
More Information for CENTRIC 22766006L
{Alternate Inventory Numbers: 227.66006L}
Continue Shopping
 
CENTRIC 22766006L  
Add to Cart to See Price
Price
Core
Pack
Total
CENTRIC 22766006Lclose
<
>
Part image
Sold Individually
CENTRIC 22766006L Specifications
ABS Sensor Ring IncludedNo
Bearings IncludedNo
Center Hole Diameter (IN)2.783
Center Hole Diameter (MM)70.700
Disc MountingFloating
Discard Thickness (IN)0.957
Discard Thickness (MM)24.300
Mounting Bolt Hole Circle Diameter (IN)4.748
Mounting Bolt Hole Circle Diameter (MM)120.600
Nominal Thickness (IN)1.035
Nominal Thickness (MM)26.300
Outside Diameter (IN)10.500
Outside Diameter (MM)266.700
Overall Height (IN)2.047
Overall Height (MM)52.000
Solid Or Vented Type RotorVented
Stud/Lug Hole Diameter (IN)0.524
Stud/Lug Hole Diameter (MM)13.300
Stud/Lug Hole Quantity5
Surface TypeSlotted X Drilled
Vane StyleStraight
C-TEK; Sport Drilled/Slotted
Centric C-TEK Drilled & Slotted Rotors provide added bite and improved looks. Zinc coating provides improved protection from corrosion extending service life.

Features & Benefits:
  • Drilled & Slotted for increased bite and better performance
  • Non-Directional Finishes
  • Machined non-friction surfaces
  • G11 metallurgy
  • Zinc coated for corrosion protection

Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function



Attention California Customers - https://www.p65warnings.ca.gov/


Attention California Customers - WARNING: Cancer and Reproductive Harm


CENTRIC Warranty Information:
90 days/3,000 miles