FVP
More Information for FVP 14139007
{Alternate Inventory Numbers: 141-39007}
Continue Shopping
 
FVP 14139007  
$35.79
Price
$40.00
Core
+ Sold in packs of 1x1
Pack
$75.79
Total
(Only 1 Remaining)
FVP 14139007close
<
>
Part image
FVP 14139007 Specifications
Abutment Clips IncludedYes
Bleeder Install Thread Count in3.5
Bleeder Screw IncludedYes
Bleeder Screw Thread Diameter0.250 in
Bleeder Screw Thread Size1/4"-28
Bracket IncludedNo
Caliper Casting MaterialCast Iron
Caliper ColorGray
Caliper ManufacturerLucas Girling
Caliper TypeFixed
Inlet Fitting TypeBubble
Inlet Thread Diameter10.000 MM
Inlet Thread SizeM10-1.00
Mounting Bracket IncludedNo
Mounting Hardware IncludedNo
Mounting Hole Diameter12.00 MM
Mounting Hole Diameter0.472 in
Pad Wear Sensor IncludedNo
Pads IncludedNo
Piston Diameter38.000 mm
Piston Diameter1.496 in
Piston MaterialSteel
Piston Quantity4
Published Bore Size38
Rust Preventative CoatingYes
Reman
FVP Friction Ready calipers are remanufactured to meet ensure predictable and reliable performance while providing long service life.

Features:
  • 100% pressure tested and inspected to guarantee proper operation and fitment
  • All guide bolts, pins and seals are replaced, guaranteeing the caliper will function correctly
  • Hardware and brackets included (where applicable) to facilitate an easy installation
  • Brake pads not included
Installation Tips
  • Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
  • Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
  • Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
  • Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
  • After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
  • After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid

Warranty Information:
Limited Lifetime