Give your Ford Ranger truck's exhaust system an upgrade with a DynoMax® single cat-back exhaust system. Comes with a DynoMax® Ultra Flo® SS polished muffler that features stainless-steel construction that delivers lasting protection and show-quality shine.

• COMPATIBILITY | Designed for 1998-2011 Ford Ranger trucks; see product information for compatibility and engine spec
• PERFORMANCE UPGRADE | Enhance your vehicle's exhaust system with this kit that can give a 12HP and 12-Lb. Ft. torque improvement
• COMPLETE SOLUTION | Includes DynoMax Ultra Flo® SS polished muffler, pipe, tail pipe, stainless-steel tip with clamp, hanger, gasket and all necessary clamps
• IMPROVED FLOW CAPACITY | 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
• PREMIUM ACOUSTIC CONTROL | Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
• SUPERIOR PERFORMANCE | Straight-through muffler design ensures unrestricted exhaust flow and reduces back pressure
• SPECS | 3-in. Outlet single wall, buffed and polished stainless-steel slant cut tips
• BUY WITH CONFIDENCE | Comes with DynoMax's limited lifetime warranty and exclusive 90-Day Performance & Sound Guarantee

For the best results DynoMax highly recommends using a good set of headphones or better than built-in computer speakers. Muffler sound is all about BASS. Cell phones and built-in computer speakers will not give you the true experience of the Muffler sound.

❚❚❚❚❚❚❚❚❚❚ Mild Sound Level	❚❚❚❚❚❚❚❚❚❚ Moderate Sound Level

❚❚❚❚❚❚❚❚❚❚ Aggressive Sound Level	❚❚❚❚❚❚❚❚❚❚ Very Aggressive Sound Level

Benefits of Purchasing an Exhaust System Kit

Replacing just a section of your exhaust system is less expensive up-front, but a complete Exhaust System Kit provides added benefits:

• Extend Service Life: New clamps, gaskets and hangers (where applicable) prevent exhaust system leaks or damage that can occur when reusing old / incompatible hardware.
• Reduce Install Time: All included parts are guaranteed to fit together seamlessly to ensure a smooth, problem-free installation.
• Save Money: The cost of the complete kit is often less expensive than buying the components individually, and means you only have to do the job once.

Quantity Components that come in this kit 1 Muffler DYNOMAX 17289 Ultra Flo SS Universal (Modifications/Fabrication May Be Required) Info Fits 112.0" Wheelbase; For Super Turbo System or 126.0" Wheelbase; For Ultra Flo Welded System or 112.0" Wheelbase; For Ultra FLO Stainless Steel System DYNOMAX 17289 1 Muffler DYNOMAX 17228 Ultra Flo Welded Universal (Modifications/Fabrication May Be Required) Info DYNOMAX 17228 1 Pipe / Resonator DYNOMAX 55594 Tail Pipe Info Fits 112.0" Wheelbase; For Super Turbo System; Must be Used w/ 36484 or 126.0" Wheelbase; For Ultra Flo Welded System; Must be Used w/ 36484 or 112.0" Wheelbase; For Ultra FLO Stainless Steel System DYNOMAX 55594 1 Pipe / Resonator DYNOMAX 55522 Tail Pipe Info DYNOMAX 55522 1 Pipe / Resonator DYNOMAX 54678 Tail Pipe Info DYNOMAX 54678 1 Pipe / Resonator DYNOMAX 53703 Info DYNOMAX 53703 1 Exhaust Bracket DYNOMAX 36162 Info DYNOMAX 36162 1 Exhaust Bracket DYNOMAX 36232 Info DYNOMAX 36232 2 Pipe / Resonator DYNOMAX 52440 Tail Pipe Info DYNOMAX 52440 1 Pipe / Resonator DYNOMAX 52539 Info 112.0" Wheelbase; For Ultra FLO Stainless Steel System DYNOMAX 52539 1 Pipe Flange Gasket / Seal WALKER 31372 Ultra Flo Welded System; T-409 Stainless Steel Info Fits 112.0" wheelbase or 126.0" wheelbase or Converter (Rear) To Pipe WALKER 31372 2 Clamp DYNOMAX 32218 Info DYNOMAX 32218 2 Hanger / Insulator WALKER 35103 Hanger; Ultra Flo Welded System; T-409 Stainless Steel Info WALKER 35103 2 Clamp DYNOMAX 33226 Mega-Clamp; Band, Lap Joint; Stainless Steel; 2.5" Pipe Diameter Info Fits Muffler To Tail Pipe; 126.0" Wheelbase; For Ultra Flo Welded System or Pipe To Muffler; 126.0" Wheelbase; For Ultra Flo Welded System or Muffler To Tail Pipe; 112.0" Wheelbase; For Ultra FLO Stainless Steel System or Pipe To Muffler; 112.0" Wheelbase; For Ultra FLO Stainless Steel System DYNOMAX 33226 1 Clamp DYNOMAX 33272 Mega-Clamp; Band, Lap Joint; Stainless Steel; 3" Pipe Diameter Info DYNOMAX 33272 1 Exhaust Bracket WALKER 36233 Ultra Flo Welded System; T-409 Stainless Steel Info Fits MUFFLER or 112.0" wheelbase or 126.0" wheelbase WALKER 36233 1 Bolt / Spring DYNOMAX 36363 Info DYNOMAX 36363 2 Clamp DYNOMAX 36438 Band; Stainless Steel; 2.5" Pipe Diameter Info DYNOMAX 36438 1 Pipe Spout / Tip DYNOMAX 36484 Info Fits 112.0" Wheelbase; For Super Turbo System; w/ Clamp; Must be Used w/ 55594 or 126.0" Wheelbase; For Ultra Flo Welded System; w/ Clamp; Must be Used w/ 55594 or 112.0" Wheelbase; For Ultra FLO Stainless Steel System; with Clamp DYNOMAX 36484

Try DynoMax premium exhaust products for 90 days*. If, for any reason, the qualifying products don't live up to your expectations during the trial period, replace the products and DynoMax will refund the original product's purchase price, plus labor (up to $50 per exhaust system).

SAFE & SOUND® GUARANTEE
90-Day, Risk-Free Trial Offer Limited Lifetime Warranty Learn More	SAFE & SOUND® GUARANTEE

* Email warranty@driv.com with the original purchase receipt to claim offer. Offer limited to purchase of one (1) DynoMax VT Muffler, Ultra Flo SS Polished Muffler, Ultra Flo Welded Muffler, Super Turbo Muffler, or Stainless Steel Cat-Back System. This offer does not include units improperly installed or substituted. Valid only on vehicles used for private, non-commercial use and may be withdrawn at any time.

Additional Resources

Installation Instructions