FRAM
More Information for FRAM PH2
Continue Shopping
 
FRAM PH2  
$4.78
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$4.78
Total
FRAM PH2close
<
>
Part image
FRAM PH2 Specifications
Anti-Drain Back ValveYes
Attachment TypeSpin-on
Burst Pressure230.000
Bypass Relief ValveYes
Bypass Relief Valve Setting12
Filter Media MaterialCellulose/Synthetic Blend
Filter TypeSpin-On Canister
Gasket Inside Diameter (IN)2.422
Gasket Outside Diameter (IN)2.813
Gasket Thickness (IN)0.203
Gasket TypeBase
Height (IN)3.984
Housing ColorOrange
Inlet TypeThreaded
Inside Thread DiameterM22X1.5
Non Slip GripYes
Outside Diameter (IN)3.656
Replaceable FilterYes
ReusableNo
Thread SizeMetric
Torque NutNo
Extra Guard; Spin-On; Includes Gasket
With 10,000 miles of protection, Extra Guard® is the perfect filter for everyday drivers who perform oil changes at OE recommended intervals. Extra Guard® has cellulose and glass blended media that provides advanced engine protection for your vehicle. Engineered with a silicone anti-drain back valve, Extra Guard® meets all manufacturer's recommended change intervals.

FRAM Extra Guard provides the perfect balance of dirt-trapping efficiency and dirt-holding capacity.

Features & Benefits:

  1. SureGrip: Provides non slip surface for easier installation and removal.
  2. Media: Fiber and resin blend creates a proprietary filter media to capture 95% of dirt particles that cause harmful engine wear.
  3. Anti-Drainback Valve: Silicone anti-drainback valve delivers superior start-up engine protection with up to 3X the hot oil resistance.
  4. Gasket: Internally lubricated sealing gasket for easier filter removal.

Which Oil Filter Is Right For You?

Driving Style
Filter Type Oil Change Intervals Normal City / Highway Heavy Traffic Dirty / Dusty Conditions Extreme Weather Towing
Economy
3,000 - 5,000 Miles        
Standard Replacement
OEM Recommended    
High Performance / Heavy Duty
OEM Recommended

Oil Change Toolbox

Installation Instructions
  • Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
  • Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
  • Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
  • Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
  • Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
  • Apply film of clean oil to filter gasket.
  • Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
  • Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
  • Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
It is illegal to dispose of used oil or oil filters in a sanitary landfill or public waterway. Many towns have free hazardous waste drop-off sites, which a quick internet search will help you find.
OEM / Interchange Numbers: 04884899AC, 19160693, 19160696, 35877761K01, 4137784, 4884899AB, 4884899AC, 5038041AA, 877761K01, 89017527, AJ0414302B, AJ5714302, AJTM14302, F1AZ6731A, F1AZ6731BD, GY0114302B

FRAM Warranty Information:
Filters - Vehicle Manufacturer's Recommended Service Intervals
Hard Parts - 12 Months
Warranty Details