Packaged in a box for ease and convenience, Dorman's Suspension Stabilizer Bar Bracket includes the bracket, bushing, nuts and/or bolts: everything necessary for a complete repair of the sway bar. Save time, money and labor by replacing only the part, not the entire assembly.

• A necessary replacement for road safety
• Direct replacement for a proper fit
• Replacement restores suspension to proper operation
• Rigorous quality control measures ensure conformance to product standards

How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

1. Use a digital caliper or micrometer for a precise reading
2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.