Brake Pads are sold as a set. Quantity of one (1) is for both wheels
DYNAMIC FRICTION 1311065201 Specifications
FMSI Number
7532-D652
Friction Material Attachment
Integrally Molded
Friction Material Composition
Semi-Metallic
Inner Pad Height
2.209 in
Inner Pad Overall Thickness
0.65 IN
Inner Pad Width
6.059 in
Mounting Hardware Included
Yes
Outer Pad Height
2.209 in
Outer Pad Overall Thickness
0.65 IN
Outer Pad Width
6.059 in
Pad Wear Sensor Included
Yes
Pad Wear Sensor Type
Mechanical
Prepared For Pad Wear Sensor
Yes
Semi-Metallic; Includes Hardware
Features & Benefits:
Stable friction performance across a wide temperature range
Rubber-Steel-Rubber shim reduces noise, vibration and harshness
Post-cured to eliminate friction material impurities for consistent performance
Scorched to minimize initial break-in time
Certified copper-free eco-friendly formulation
Positive mold to ensure consistent material density
Chamfered to reduce noise when braking
Slotted to dissipate heat and prevent brake fade
Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?
A common question many drivers have when shopping for brake pads is “What is the difference between the different brake pad materials?” While all brake pads will stop your vehicle, there are pros and cons of each pad material:
Brake Pad Material
Cost
Dust Level
Noise Level
Stopping Power
Pad Life
Organic
$
Semi-Metallic
$$
Ceramic
$$$
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Fits Front; 4WD; 10 inch Rear Drums or Front; 4WD; 9 inch Rear Drums or Front; RWD; 10 inch Rear Drums; 285mm Rotors or Front; RWD; 9 inch Rear Drums; 285mm Rotors or Front; RWD; 10 inch Rear Drums; 260mm Brakes; 2-Wheel ABS (ABS Sensors on 2 of 4 Wheels) or Front; RWD; 9 inch Rear Drums; 260mm Brakes; 2-Wheel ABS (ABS Sensors on 2 of 4 Wheels) or Front; RWD; 10 inch Rear Drums; 260mm Brakes; 4-Wheel ABS (ABS Sensors on all 4 Wheels) or Front; RWD; 9 inch Rear Drums; 260mm Brakes; 4-Wheel ABS (ABS Sensors on all 4 Wheels)
Fits Front; 4WD; 10 inch Rear Drums or Front; 4WD; 9 inch Rear Drums or Front; RWD; 10 inch Rear Drums; 285mm Rotors or Front; RWD; 9 inch Rear Drums; 285mm Rotors or Front; RWD; 10 inch Rear Drums; 260mm Brakes; 2-Wheel ABS (ABS Sensors on 2 of 4 Wheels) or Front; RWD; 9 inch Rear Drums; 260mm Brakes; 2-Wheel ABS (ABS Sensors on 2 of 4 Wheels) or Front; RWD; 10 inch Rear Drums; 260mm Brakes; 4-Wheel ABS (ABS Sensors on all 4 Wheels) or Front; RWD; 9 inch Rear Drums; 260mm Brakes; 4-Wheel ABS (ABS Sensors on all 4 Wheels)
DYNAMIC FRICTION
Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems).
DYNAMIC FRICTION Warranty Information:12 months/12,000 miles