RAYBESTOS
More Information for RAYBESTOS FRC11022C
Continue Shopping
 
RAYBESTOS FRC11022C  
$35.79
Price
$21.00
Core
+ Sold in packs of 1x1
Pack
$56.79
Total
RAYBESTOS FRC11022Cclose
<
>
Part image
Sold Individually
RAYBESTOS FRC11022C Specifications
Bleeder Screw ThreadM10x1.5
Caliper Bracket Mounting Hole Size (MM)14.000
Caliper Bracket Mounting Hole Thread Pitch (MM)2.000
Caliper Casting MaterialCast Iron
Caliper ConfigurationSemi-Loaded (Does Not Include Pads)
Caliper Piston Diameter (MM)50.900
Caliper Piston Quantity2
Caliper TypeFloating
Manufacturing TypeRemanufactured
Surface FinishCoated
R-Line; Coated; Does Not Include Pads
Raybestos R-Line Reman Plated Brake Calipers are engineered to face the toughest weather conditions. A proprietary zinc electroplating process helps prevent rust and provides protection for all kinds of weather. These plated brake calipers maintain their high-quality appearance throughout their life, delivering continued functionality and an extended service life.

Features & Benefits:
  • OE-matched design and specifications
  • Zinc electroplating on all cast iron housings and brackets for all-weather protection
  • Surface finish to closely resemble OE
  • EPDM70 rubber components for superior heat resistance, performance and durability
  • Silicone boots match or improve OE design where applicable
  • Pre-lubricated guide pins included
  • Brackets included where applicable

Raybestos works tirelessly to ensure their calipers are tested to the highest multinational industry standards to ensure you receive a high quality product. The testing parameters include:

  • High and low-pressure leak testing
  • Extreme pressure strength and leak testing
  • Cyclic durability under extreme temperatures
  • Piston retraction, fluid displacement and residual drag torque
  • Humidity and salt spray testing for corrosion resistance
  • Rubber aging and degradation resistance
Installation Tips
  • Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
  • Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
  • Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
  • Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
  • After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
  • After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid

Attention California Customers - Warning: This product can expose you to chemicals including nickel, which is known to the state of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.


Warranty Information:
18 Months / 18,000 Miles