AUTO 7
More Information for AUTO 7 8400508
Continue Shopping
 
AUTO 7 8400508close
Part image

Auto 7 is America's leading supplier of Original Equipment (OE) quality parts for Hyundai, Kia, and Daewoo.

They enjoy a rich history in the OEM parts market as part of an international auto parts company in business since 1953. This history enables Auto 7 to offer reliable, convenient and affordable OEM replacement parts to best service your vehicle.

Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

  1. Use a digital caliper or micrometer for a precise reading
  2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
  3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.

OEM / Interchange Numbers: 8400354, 96435292, 96653351, 96870461

AUTO 7 Warranty Information:
12 months/12000 miles. IMPORTANT A/C COMPRESSOR WARRANTY NOTE: 1) Replace the A/C Receiver Drier/Accumulator or desiccant element 2) Replace the A/C Expansion Valve 3) Replace any hose assembly containing a muffler 4) Perform a complete A/C system flush 5) Pull a vacuum on the closed system for the required amount of time to rid the system of any moisture. In the event that a warranty situation is called for, you will be required to supply written documentation verifying that the above work was performed by an ASE- certified mechanic/facility (actual copy of the Repair Order). No warranties will be considered without this required documentation.