|
SUNSONG 3403131
|
|
$20.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$20.79
Total
|
|
|
|
|
|
| SUNSONG 3403131 Specifications |
|---|
| Length (IN) | 49 | | End 1 Fitting Size (IN) | 3/8 | | End 2 Fitting Size (IN) | 1/4 | | Bracket (Y/N) | N | | Tech Tip | TT1000 | | End 1 Fitting Type | Female | | End 2 Fitting Type | Male Inverted Flare | | Hose Material 1 | CSM | | PS Switch Port (Y/N) | N |
|
|
Features:
- Manufactured from high grade steel and electroplated with a zinc coating, for superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime
- Hoses have a max working pressure of 1,500 psi, a burst pressure rating of 8,700 psi, and a tensile strength of 1,600 lb, for long life and durability
- Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation
- Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves, as required, to ensure that all wearable parts are restored to original condition.
 Installation Tips - Replace all power steering hoses at the same time, to prevent system contamination
- Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
- Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
- Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
|
SUNSONG Warranty Information:12 Months |
|
